NEWS CENTER

With the development of science and technology, the power supply tends to be more and more dense and miniaturized, which puts forward higher requirements for the stability of the power supply. In order to prevent the damage of moisture, dust and harmful gases to electronic components, slow down vibration, prevent external damage and stabilize component parameters, and reduce the adverse effects of the outside world, it is necessary to encapsulate the power supply. There are three types of commonly used; three-axis desktop automatic glue filling machine, semi-automatic glue filling machine, automatic glue filling machine.

The operation of the glue filling machine is particularly simple. First adjust the proportion of glue, and then set the program according to the instructions of the equipment, and the glue can be poured. The equipment program sets the amount of glue applied per second, the glue filling time, the glue filling path, and the stop time after filling the product, and the operation is very simple. Three-axis automatic glue filling machine is generally based on small power supply, that is, the amount of glue filling is from a few grams to dozens of grams as an example. Electric toothbrush power supply, bulb lamp power supply, etc. The glue filling method is also very simple. Put the power supply into the fixture, then put the fixture on the workbench of the glue pouring machine, press the start switch, the machine will fill from the first to the last, and stop automatically after all products are filled. Then manually remove the fixture from the table, place the power fixture on another board, and press to start the cycle.

Semi-automatic glue machines are usually placed next to the assembly line. Manually place the power supply under the user's head, and then press the foot switch, the machine will automatically fill the glue. After filling, it will automatically stop, and then manually put the filled power supply on the assembly line. The semi-automatic glue pouring machine is suitable for various power supplies, regardless of size.

Automatic glue filling machine is generally used for assembly line. The whole plate fixture equipped with power supply is placed on the conveying line, the machine automatically pats glue, and the glue is automatically fed into the oven after pouring, which saves a lot of labor and has higher production efficiency. Due to the continuous expansion of the types of products applicable to the glue machine, the name of the subdivision has also increased a lot. Specific to a certain product, from the production process of the equipment, it becomes more professional and targeted. The wide application of glue machine equipment has replaced the work that is difficult to complete manually, liberated productivity and promoted the growth of efficiency.

AB two-liquid glue filling machine is obviously different from ordinary one-component glue filling machine, which is specially used for ordering two-component catalytic glue filling machine. It is well known that two-component glue is a kind of glue that needs to be mixed with catalyst to cure. AB double-liquid glue pouring machine is developed for this kind of glue. It has two plastic barrels, one of which is used to hold glue and the other is used to hold catalyst.

The glue is mixed automatically by the machine. Since the glue is packed in two barrels AB, the glue is pumped into the mixing tube and mixed before being pointed out, so there is no need to worry about the glue solidifying in the barrels. There are two common AB double-liquid glue filling machines on the market: full-automatic double-liquid glue filling machine with XYZ manipulator and AB double-liquid glue filling machine without manipulator.