NEWS CENTER

Automatic dispensing machine is widely used in modern industrial production, many places need automatic dispensing machine to dispensing. The scope of application is very wide. From airplanes and ships to the production of clothing, toys, accessories, etc., dispensing may be required. Therefore, as long as the glue is in place, dispensing equipment is needed to assist in the dispensing process, because the traditional manual dispensing process has been eliminated. Two working modes of dispensing machine:

1. Manual dispensing: use the principle of manual dispensing machine to dispensing glue on electronic products. The process is simple and the cost is low. The disadvantage is that the dispensing efficiency is slow and will consume a lot of labor.

2. Automatic dispensing: The principle of the liquid crystal dispensing machine is to use air pressure to push out the glue within a set time. Each infusion time is controlled by the instrument to ensure that each infusion volume is the same. As long as you choose the right air pressure, time and the right needle, you can easily change the amount of each infusion, which is convenient and accurate.

The dispensing machine is a major change from manual to automatic, which includes writing mechanical, electrical and PLC programs. A good interpretation of the extraordinary application of mechatronics technology. It is the embodiment of mechatronics towards intelligent, modular and green. However, due to the lack of experience of the operators and the lack of relevant training, many factories and companies have bought back the dispenser. Therefore, some small problems are often not paid attention to and dealt with in the production process, which affects the dispensing effect of the dispensing machine.