NEWS CENTER

Many people ask,dispensing machineandglue filling machineWhat is the difference? Isn't it an automatic device specializing in fluid control? What is the difference? First, let us understand what is a glue filling machine, a glue dispenser, and what is the difference.

One. What isdispensing machine? The glue dispenser is also called a glue filling machine, which is a device that specifically controls fluid. The automatic machine that mainly drops and coats the fluid on the surface of the product or inside the product can realize three-dimensional and three-dimensional path distribution, precise positioning, precise glue control, no wire drawing, no leakage, and no glue.

II. What isglue filling machineThe glue pouring machine is a device specially used for fluid control. This is an automatic machine that can drip, coat and seal liquid on the surface or inside of the product to achieve sealing, fixing and waterproofing. Usually used. It is a two-component glue. It is also divided into automatic glue filling machine and vacuum glue filling machine.

Three.glue filling machineanddispensing machineThe difference:

1. Different glue control methods: Most dispensing machines on the market still mainly rely on air pressure to control glue. Of course, there are some that do not use air pressure. The glue filling machine mainly relies on the metering pump to control the amount of glue, and the amount of glue is adjusted by adjusting the speed of the pump.

2. The amount of glue is different: relatively speaking,glue filling machineThe small glue output is greater than the glue amount of the glue dispenser, while the glue output of the glue dispenser can reach more than ten to twenty grams per second. The amount of glue is very small, some dispensing machines can reach 0.001 grams.

3. The dispensing accuracy is different: the dispensing machine usually uses a small amount of glue, which has a higher accuracy, while the dispensing machine uses a larger amount of glue, and the accuracy of the glue is slightly lower.

4. The applicable glue is different:dispensing machineSuitable for single liquid (one component) glue product processing glue. The glue pouring machine is suitable for two-component (two-component, also known as AB glue) glue. The product process uses glue, and there is a big difference between the two.