NEWS CENTER

 AB glue machineIt is a two-liquid dispensing machine. The name is due to the nature of the glue, which can adapt to the mixing ratio of the two-component glue. Compared with ordinary single-component dispensing machines, there are more components, such as controllers and dispensing valves to control the amount of dispensing. Amount. At the same time, the nature of the glue largely determines and affects the type of equipment used. The setting time of the glue, the test size and other relevant data have very important information for the configuration of the dispenser device.

 AB glue machine, Also known as AB double-liquid machine, AB filling machine, AB glue machine, is a machine specially used to distribute two-component glue, which is obviously different from ordinary single-liquid glue dispenser. First of all,AB glue machineThere are two barrels, where barrel A is for glue and barrel B is for catalyst. When glue A comes into contact with the catalyst, the glue begins to solidify. Secondly, the machine automatically mixes the glue for dispensing large quantities of product. Since the AB barrel is separate, the glue is pumped to the mixing tube by a pump, so there is no need to worry about the glue happening in the barrel. Conservation. The two-component glue is ordered using an ordinary one-component machine. Usually suitable for a relatively small number of products. It needs to manually mix the glue in advance and then pour it into the syringe. The amount of each time should not be too much, otherwise the order is not completed glue curing.

 AB glue machineMainly used for power potting, capacitor potting, LED module potting, LED energy-saving lamp potting, transformer potting, sensor potting, automobile ignition coil potting, PCB integrated circuit board potting, etc!