NEWS CENTER

Two-liquid dispensing machine is also called mixing dispensing machine, two-component dispensing machine, commonly used in the main agent glue and fixing agent according to different mixing ratio requirements of the dispensing, filling glue process. Can improve the glue viscosity and speed up the glue curing time, especially now the power supply, transmission devices, transformers and other dispensing process is very common. How does the double liquid dispensing machine realize the precise ratio of glue in the automatic proportional mixing glue?

Pump body-control the amount of glue. Especially when mechanical automatic matching of glue ratio is required, the two glues are stored separately in two glue barrels. Each barrel needs to be equipped with a separate pump body to control the amount of glue output. The pump body with adjustable rotation speed can be selected according to the size of glue output to achieve accurate mixing ratio.

Valve body-glue automatic mixing. Double barrel independent glue, need to be evenly mixed before the glue, so as to avoid the two kinds of glue is not fused. The dispensing valve body is fully mixed automatically before the glue is produced.

The proportion of double liquid glue dispenser is more than 1:1, 2:1, 5:1 and 10:1, and the stainless steel material barrel of about 5-50L can be selected. Proportioning high and low level switch, below the level of storage automatically remind alarm and stop protection. Of course, in the formal mass production and use, it is necessary to do a good job in product testing and master the use skills, especially the elimination of a small amount of bubbles in the glue and the positioning of the product dispensing, the size of the glue, etc. need to be paid attention. Double liquid dispensing machine can be heated according to different types of glue configuration

Tablet computer is a kind of mobile device that people often use. It belongs to the size of palm, which is very suitable for sealing process with automatic dispensing machine during production. According to the composition of the tablet computer, it is generally reasonable to use hot melt adhesive as the dispensing process, and naturally the hot melt adhesive dispensing machine is also used.

Because the hot melt adhesive dispensing machine has its own heating device and has the advantages of high precision and stable adhesive control, it can be applied to many different product dispensing, such as dispensing, filling and bonding technology commonly used in various electronic consumer goods, because it operates automatically by program setting coordinates, and does not need manual control during the working process, it also reduces the incidence of undesirable problems such as wire drawing and glue leakage that may occur in the tablet computer shell package.

Therefore, it is very good for hot melt adhesive to be applied to the shell, internal components and batteries of tablet computers. When putting into work, it is necessary to install a hot melt dispensing valve on the automatic dispensing machine, which can properly control the dispensing of glue, ensure that the hot melt adhesive will not cause adverse effects on the shell of tablet computers, better improve the packaging quality and speed of tablet computers, and provide more comprehensive dispensing process support for manufacturers.

Hot melt adhesive dispensing machine can be applied to the high demand of the tablet computer production line, to help manufacturers to complete more types of tablet computer shell sealing packaging work. The impact of repeated glue extraction accuracy is very small, which not only improves the production efficiency of our enterprise, but also saves time, worry and effort.