NEWS CENTER

The operating principle of the automatic dispensing machine packaging equipment is simpler than that of the manual packaging equipment. The glue is fed into the glue bottle (syringe) by tightening the air, and the glue is pressed into the feed tube connected to the piston chamber. When the piston is in the upper stroke, the piston chamber is filled with glue. When the piston pushes down the glue dropping needle, the glue is pressed out from the needle nozzle. The amount of glue dripped out is determined by the interval of piston undershoot, which can be adjusted manually or controlled in software. Next, Weihai Huashun precision mechanical technicians will introduce it to you in detail.

1. Weihai Huashun precision machinery automatic dispensing machine working principle: Weihai huashun precision mechanical automatic dispensing machine, also known as glue coating machine, glue dripping machine, glue filling machine, etc., specially for fluid control. And the automated machine that drips and coats the fluid on the surface or inside the product can realize three-dimensional and four-dimensional path dispensing, precise positioning, precise glue control, no wire drawing, no glue leakage, and no glue dripping. The glue dispenser is mainly used for precise spot, injection, coating and drip of glue, paint and other liquids in the product process to the precise position of each product, and can be used to realize dot, line, round or arc.

1. Dripping of rubber valve This kind of situation often occurs after the rubber valve is closed, 95% of the reason is that the needle diameter used is too small. Too small needle will affect the flow of liquid caused by back pressure, resulting in the formation of the valve closed shortly after the phenomenon of drip. Too small the needle will also affect the rubber valve began to use when the bubble action. This problem can be solved by simply replacing a larger needle.

What are the daily maintenance tips of the dispensing machine At present, the dispensing machine has been widely used in the fields of electronic components, integrated circuits, automobile parts and packaging box sealing. In its application, the daily maintenance of the dispenser can not be ignored, because it is directly related to the service life of its equipment.

Today, the biennial BICES exhibition in Beijing has long been an unchanging agreement for construction robots. And this year, especially special. This is the key node for the construction machinery industry to take off again after five or six years of deep adjustment after the end of the barbaric growth period.