NEWS CENTER

Automatic dispensing machine is an automatic gluing equipment developed for the sealing requirements of electronic precision equipment, which takes the hardware and control system technology of the equipment as the core. So how to analyze the market development of dispensing machine?

How to analyze the market development of dispensing machine?

1. Market size: By analyzing the consumption scale and year-on-year growth rate of China's dispensing machine industry in the past five consecutive years, judge the market potential and growth of the dispensing machine industry, and predict the growth trend of consumption scale in the next five years.

2. Product structure: classify the products of the dispensing machine industry from multiple angles, give the consumption scale and proportion of dispensing machine products of different types, grades, regions and application fields, and conduct in-depth research on the market capacity, demand characteristics and main competitors of each subdivided product, which will help customers grasp the product structure of the dispensing machine industry as a whole and the market demand of each subdivided product.

3, market distribution: from the user's regional distribution, consumption capacity and other factors to analyze the market distribution of the dispenser industry, the consumption of large-scale key regional markets to conduct in-depth research, including the region's consumption scale and proportion, demand characteristics, demand trends.

4. User research: By dividing the user groups of the dispenser products, the consumption scale and proportion of the dispenser products of different user groups are given. At the same time, in-depth investigation of the purchasing power, price sensitivity, brand preference, purchase channels, purchase frequency of each user group on the dispenser products, analysis of the user group's attention and unmet demand for the dispenser products, forecast the consumption scale and growth trend of each user group on the dispenser products in the next few years, so as to contribute to the dispensing.

How to control the amount of glue dispensing machine?

1. Air pressure controls the amount of glue, which is well understood. When the pressure is high, the pressure on the glue will also increase, so the amount of glue will also increase. Just like a faucet, the greater the water pressure, the greater the corresponding amount of water discharged.

2. For some glue with high concentration and poor fluidity, spiral valves are usually used to control the glue. The glue is extruded by the helical rotation of the screw. At this time, the amount of glue depends on the speed of rotation of the spiral valve. The faster the spiral valve rotates, the greater the amount of glue, and vice versa.

What is the debugging method of dispensing machine?

1. Selection of dispensing machine

The inner diameter of the dispensing machine should be selected as 1/2 of the diameter of the glue spot. In the dispensing work, we can choose the appropriate dispenser according to the size of the product, and choose the appropriate needle for different sizes of products. The dispensing amount of the dispensing machine is 0.005ml smaller than the standard, the inner diameter of the stainless steel needle is 0.1mm, and the smaller inner diameter of the needle is 0.1mm.

2. Setting of glue feeding time of automatic dispensing machine

The dispensing amount should be set to 1/2 of the product spacing to ensure that there is enough dispensing amount to paste the components to prevent excessive glue leakage. The glue output of the automatic dispensing machine can be adjusted by the glue output time of the dispensing machine. In actual production, the dispensing amount and time can be adjusted according to the specific situation.

3. Set the pressure of the dispensing machine.

The dispensing volume of the dispenser is provided to the hose and needle by the controller, and the pressure of the dispenser determines the dispensing volume and dispensing speed. Excessive pressure can easily lead to problems such as glue spraying and affect the appearance of the product. If the pressure is too weak, uneven dispensing and leakage will occur, which will affect product quality.