NEWS CENTER

The glue pouring machine, also known as AB double liquid glue pouring machine, is an automatic machine that drips, coats and encapsulates liquid on the surface or inside the product by controlling the fluid, so as to achieve the functions of sealing, fixing and waterproofing. Generally, two-component glue is used, which is mainly used for bonding, pouring, coating, sealing and filling glue, oil and other liquids in the product process. Automatic glue filling machine can realize the point, line, arc, circle and other irregular graphics glue filling.

What is the suitable liquid for glue filling machine? Let's take a brief look at it.

The glue commonly used in glue filling machines is generally two-component glue, also called AB glue, of course, it is also suitable for one-component glue, in which A glue is the main agent and B glue is the curing agent. At present, the glue widely used in the market is epoxy resin, polyurethane and silica gel, and the ratio of curing agent is 1:1,2:1,5:1,4:3,10:1.

What is the application field of glue filling machine? Let's take a brief look at it.

Glue pouring machine is commonly used for LED display screen glue pouring, LED energy-saving lamp glue pouring, LED power supply glue pouring, LED light bar, computer power supply glue pouring, relay module glue pouring, sensor glue pouring, PCB board glue pouring, solar panel glue pouring, coil inductance glue pouring, soft light bar glue pouring, point light source glue pouring, LED table screen glue pouring, etc.

What is the general classification of glue filling machines? Let's take a brief look at it.

(1) Simple glue filling machine, simple composition, two buckets and one cylinder, the glue is pressed out and mixed by the pressure of the gas, the general ratio is roughly 1:1, mainly used for some low-end products that are not too strict on the glue filling process.

(2) Semi-automatic glue filling machine, this glue filling machine can realize the automatic ratio of various proportions of glue. However, this kind of glue filling machine does not have a motion control platform, and directly injects glue into the product to be filled, which is generally suitable for LED energy-saving lamps and power supplies.

(3) Automatic glue filling machine. This glue filling machine can not only realize automatic mixing of glue in various proportions, but also meet the requirements of mixing glue injection in the ratio range of 1:1-10:1. It has a motion control platform and can follow a straight line or a three-dimensional path. The higher end of the three-dimensional path is generally controlled by a computer and is suitable for various types of products. The automatic glue filling machine is used for large-area glue filling and requires uniform glue. Among them, LED modules are common.

(4) On-line glue filling machine, this kind of glue filling machine has a high degree of automation and full-automatic glue filling operation on assembly line, which has been successfully applied to glue filling operation on battery cover and bulb lamp assembly line.

What is the classification of the control operation type of the glue filling machine? At present, there are two main control methods for the glue filling machine in China, touch screen control and computer control.

1. touch screen control. Embedded touch screen controls the mixing ratio of glue filling, the amount of glue and the speed of glue output. 2. computer control. The computer control panel is used to set the relevant glue filling path, which is simple and quick. Through the vision system, you can clearly see whether the glue filling position is deviated, so as to deal with it as soon as possible and ensure the quality of the glue filling product.