NEWS CENTER

The ro film rolling machine uses far infrared radiation to directly heat films of various specifications. The products are transported to the shrink furnace through the conveyor belt. The products are placed on the shrink packaging film and enter the packaging machine after sealing. The products are automatically shrunk. The ro film rolling machine system can achieve a better shrink packaging design effect without affecting the packaging. The electronic speed change and the temperature control of the solid-state regulator are used for the purpose of the ro film rolling machine.

1. On the packaging bag: remove the packaging bag and send it to the clamping device of the R0 film rolling machine, without the need for packaging bag reminders, which reduces labor intensity.

2. Print production date: ribbon detection, ribbon interruption reminder, touch screen display, keep the packaging bag code normal; The form of steel printing code.

3. Open the bag: Open the bag for inspection to keep the material from being lost.

4. Filler material: detect, unfilled material, heat seal and seal to keep the bag from wasting.

5. Heat sealing and sealing ro film roll machine has temperature reminder to keep sealing quality.

6, appearance: to maintain the appearance of the beautiful degree.

R0 film rolling machine is mostly used in various greenhouses. Its parts are produced by advanced technology, with long service life, and installation and operation are relatively convenient. In order to ensure its service life and use efficiency, we need to do it daily. For maintenance, let's take a look at the daily maintenance measures of ro film rolling machine.

Here we introduce the safe use of ro roll film machine:

1, according to the greenhouse length, width, camber and the weight of the agricultural film, according to the standard selection of the appropriate host, pay attention to leave a load margin, prohibit full load and overload operation, and take necessary security measures for the motor.

2, according to the weight of the roll film, according to the standard with support rods, push rods, roll rods, bolts, to avoid the rod is equipped with unreasonable folding rod, twist rod.

3. Cables and other power distribution equipment purchased by users should be qualified products that meet national standards to ensure the safety of electricity and the safe operation of the host.

4. Fix the reverse switch on the main support rod, and add a control knife switch in front of the reverse switch to ensure that the power supply can be cut off in time when the reverse switch fails.

5. The host has already participated in enough qualified lubricating oil when leaving the factory, and the user does not need to participate again.

6. The ice and snow climate should start the film rolling machine after clearing the clean and cold-proof film to prevent the agricultural film from being damaged due to rain, snow and ice.

7. It is forbidden to touch the winding rod when winding the new ro film winding machine, and shut down the machine in time after the winding is in place to prevent the winding film from overturning into the shed offside.

8. During installation and use, when the vertical rod and roll rod are deviated, the user should adjust, straighten and tighten the bolts in time to ensure the normal operation of the host and rods and extend the service life.